6/28/2017 – Another Van Halen Gameplay Video

Fixed some small stuff tonight, and shot another video.  This will probably be the last video of Van Halen before Pintastic.  Gotta jump back over, and get Sharpe Shooter 3 back up and running.  My gosh, these machines just might be done before Pintastic!

6/27/2017 – Pictures of Van Halen

Truth be told, it is time for me to go to bed, and I don’t feel like writing anything.  I’m getting pretty darn sick of working on this machine, but it is nearing completion.  About two weeks left, until Pintastic.

Shameless plug, come see my seminar at 3:00 pm on 7/7/2017 at Pintastic in Sturbridge, MA.  I’ll be there all weekend, so stop me and ask me any questions you want.  A good number of people there know who I am, so I should be pretty easy to find.  Stop by the Lermods booth at Pintastic, and they will set up free shipping of OPP cards from Mezel Mods.

End shameless plug…Here are the pictures I took tonight.

This slideshow requires JavaScript.

 

6/24/2017 – Some new videos of game play

This is mostly for the people who subscribe to the blog but aren’t subscribed to the youtube channel.  Last couple of days have been very busy.  While trying to fix the light bulbs, I accidentally pulled out the connector for the ground of the transformer.  This caused all sorts of issues, included blowing up some of the MOSFETs.  After struggling for a couple of days and fixing things piecemeal, I simply gave up.  I replaced the two OPP cards that drive all the solenoids.  It was about $20 in parts and about 1 hour in soldering to build the new cards but the savings in my angst was well worth it.  I didn’t have some parts on hand so there was a Mouser order involved.  I now have a much better supply of MOSFETs.

I switched from the cheap MOSFETs (FQP13N06L) to using IRL540 MOSFETs.  In the first cards, I had a couple IRL540s and mostly FQP13N06L.  After accidentally disconnecting the ground (actually the current return for the high voltage solenoids), it turns out that many of the FQP13N06L either failed or failed later after several games.  Below is the sequence of events:

• I lifted the playfield to adjust some bulbs.  I pulled too hard on the cable at some point, and it pulled the connector off the transformer that returns the current for the solenoids.
• Lowered the playfield, and started playing a quick game.  At some point during the game, I noticed that one of the sling shots was on constantly.  (It was stuck on for a while before I noticed it…maybe 30 seconds).  Performed a test or two and proved it was the MOSFET.  Soldered in a new MOSFET, and started a new game.
• Almost immediately another MOSFET failed.  This time it was the knocker.  Once again, tested, and this time I simply desoldered the high voltage wire to the knocker.  (The knocker isn’t currently used in the game code).  At this point I thought something was wrong but I didn’t know what.
• Powered it up and started playing again.  I can’t remember, but I think the other slingshot failed at this time.
• Finally powered everything off and checked the connections.  Found the two sides of the high current return connector were almost completely off.  Plugged those back in.
• Now everything should work.  Powered everything up and after batting the ball around for a while, either a slingshot or a pop bumper failed.
• Frustration set in.  Gripe a lot and eventually go to bed.  Next day looked around in the bin of built cards and found I had enough to replace the OPP board that had 8 solenoids on it.  Built that card into a full card, and threw it in the machine.
• After about 5 minutes of playing the new card fails with one of the slingshots being locked on.  (I can’t remember if it is the same slingshot that was locked on for 30 seconds or if it was the other slingshot).
• Got frustrated again and decided that I was going to replace all the MOSFETs with IRL540s since none of those failed.  Made order from Mouser.

So that’s the whole story.  Why did the FQP13N06L fail after I reconnected the ground?  Could it be that I now have a solenoid with an internal short somewhere in the coil.  I don’t know, but at this point, it is working.  Could be I have a ticking time bomb that will fail during Pintastic.  Only time will tell.

Here are the two videos that were done yesterday.  I apologize for the scattered commentary but the kids felt they needed to ask me questions during it, and pass me notes, so I repeat things often.

Here is another video of the white wood mode.  I finally realized that using the target at the end of the inline drops is not going to work because it simply traps the ball.  (Scott Danesi could have told me that earlier, but I’m not trying to achieve a Danesi lock.)  I ended up moving the reset to the Eddy target for white wood mode.   During the real game, it waits a couple of seconds for the ball to drop out of the inlines, then resets it.  I wonder how the old Dolly code reset the inlines?  It had to be a hit of a separate target, or maybe it never reset them until the next ball:

Here is a second video showing the OPP Pinball Framework and rules driving the machine.  You could see scoring happening, but well, I set up the camera too low so it got cut off.   Sorry.  I try to explain some of the rules.  It seems really easy to collect Alex (5 hits for each letter in the pop bumpers), so that might need to be increased to 10 hits per letter.

Speaking of Pintastic… it happens on July 7-8th, 2017.  The machine will be there in the freeplay room.    (I’m also planning on bringing SharpeShooter 3 again).  My seminar is at 3:00 pm on Friday, July 7th on general pinball electronics.  I will probably spend the last part of talk discussing a little bit about the making of the Van Halen machine.  Dave Marston said he is setting up two different times when I will be hanging around the two OPP machines in the free play area and I’ll give tours under the playfield, in the back box, etc.  Let people see how it all works and ask questions.  Supposedly there is going to be a time on Friday and a time on Saturday for that.  Like I said

At the seminar on Friday, I will be giving away a bunch of free stuff…also known as parts that I removed from Dolly and no longer need anymore.  I’ll also give away another set of OPP bare boards.  If you sit through my seminar, you deserve a chance at some free gifts.

I will be around all weekend.  So even if it isn’t one of the designated times, simply stop me, and ask me questions.  (On Friday I’ll be wearing an OPP T-shirt, so that should be a dead give away)  The machines are there until 10 pm on Saturday, so after I get sick of playing pinball, I’ll look forward to talking to people about their homebrew pinball ideas.

2017/06/13 – Starting to go back together

We are getting down to the line.  Less than a month to go.  The machine is still not back together, but strangely, I feel at ease with it all.  Worst case the machine can be played in white wood mode.  The question is…”Is that good enough?”  The answer is “Heck, no!”  We gotta go for broke.

We need some plastics.  Got the sheet of PETG a couple weeks back and found the proper tool to cut it out are the tin snips.  (At least that is the proper tool in my tool chest).  After cutting it out, I used a Dremel tool with a sanding barrel on it, to make the edges nice and smooth.  Just have to apply the vinyl overlay which is sitting in the basement waiting for my time, but I want to take my time with it.  That will probably happen on Friday.

Lay out plastics to minimize the amount of cuts.

Plastics made out of PETG and cut out using tin snips. Edges sanded with rotary tool with round sanding bit.

Isn’t going to be much of a pinball machine if we can’t display the scores from the game.  I built a mount out of wood, and used the monitor mount that came on the back of the monitor.  Nice part about it, is that it provides a push button to remove the monitor easily.  This worked out even better than SS3, because it actually locks the monitor in place without requiring a screw.

Allows for easy removal of monitor which is very important.

Monitor installed position

Last up is the topper.  Nothing says the 1980s like a boom box.  Joe provided me with a topper, and I added a little of my own flare.  That should give true stereo sound (which Dolly never had), and the sound quality should be significantly better.  You can also see that I ended up mounting the Bally interface board, coming up with a good way to hold the cables so that stress isn’t put on the connectors (used velcro to hold cables at the right positions and makes it easy to take everything apart for transport to Pintastic).  Finally I mounted the PC power supply that is providing 5V for the raspberry Pi and 12V for the amplifier.  That’s all I have for tonight.

Nothing says the 80s like a retro boom box

 

2017-06-09, Video of Rules in OPP Simulator

Threw up a quick video on Youtube of the rules running in the OPP simulator.  What a pain in the rump to get this video up.  CamStudio completely failed me, and I eventually gave up after 6 tries, and recorded it using Microsoft Expression Encoder which allows you to record up to 10 minutes for free.  Bah!  Such a simple thing to want to record something off your computer, but it was all bad.

Rules are basically good enough right now.  It took me about two days of coding spread over four days to get where we are.  Things went well, and I’m pretty happy with how the code worked out.  I have a couple of small things that I want to do, but now the biggest things are to get back to working on the machine itself.  Got a whole bunch of mechanical things to do such as get some plastics, etc.  Hopefully I’ll have some time this weekend since last weekend was busy.